L-TYPE CORE COMPOSER SHIPMENT/FOCUSMACH
Main Mechanism
(1)In-feed Conveyor System(Including conveyor belt and regulator)
(2)Random Chipper System.
(3)Waste Separator System.
(4)Joint devices A. Glue Tank. B. Glue Wire Joint System.
(5)Uniform Clipper System.
(6)Automatic Clipper System.
(7)Electric Control Box.
1.Main function
(1)Cut the incomplete core veneer to obtain shipshape size.
(2) Separate the waste.
(3) Spread the glue on the veneer and stuck on the bottom of veneer of veneer with polyester Yarn to augment the strength of veneer.
(4) Cut the veneer of measuring size4'
(5) Collect veneer that after cutting automatically.
2.Safe device
(1)In-feed Safety deice
A. When thickness detector system starts, in order to prevent people having accidents by incorrect operation, it had installed a safety automatic bolt.
B.Operators have to make sure whether the plug is inserted in or before replacing the knife or doing other tasks.
C. No matter what, DO NOT put your hands or fingers under the knife when you replace the knife.
(2)Out-feed Safety device
When the first veneer sticks the glue line or to line or to clear away the hot glue dregs, the upper of joint install can to run up and easy to operation. When upper of joint install to lift has a safety plug on bracket, in order to prevent people having accidents by incorrect operation, therefore, for keeping the safety, we make sure that the safety plug is inserted in it or not before beginning to work.
