1. There must be no iron, stone or other debris in the guillotine material.
2. When working, adjust the material feeding amount appropriately. Too much material may cause overload and stop, while too little material may affect the cutting efficiency.
3. If material blockage occurs during work, do not force feeding with hands or iron bars, etc., and stop the machine immediately to clear it.
4. When working, if any abnormality is found or any abnormal sound is heard, stop the machine immediately for inspection. The power must be cut off before inspection, and troubleshooting is prohibited while the machine is running.
5. When stopping work, let the machine idle for two minutes, blow away the dust and weeds in the machine, and then shut down the machine.
